What is a good degreaser for paint?

A good degreaser is essential for preparing surfaces before painting. We offer HG liquid sander for painting without sanding — an effective solution that leaves the surface very clean and grease-free, making sanding unnecessary in many cases. Household alternatives such as warm water with washing-up liquid can sometimes help, but they do not always deliver the best results. For optimal adhesion and durability, it is important to thoroughly remove dirt, grease, atmospheric pollution and nicotine deposits with a high-quality degreaser. Always check the manufacturer's maintenance instructions beforehand.

HG solutions for degreasing wood before painting

To properly prepare surfaces for painting, it is important to degrease them. We offer the following solution:

• HG liquid sander for painting without sanding: This concentrated product makes paintwork and untreated surfaces very clean and grease-free, eliminating the need for sanding in many cases. It is also excellent for rapidly removing atmospheric pollution and nicotine deposits from soiled paintwork, both indoors and outdoors. For use as preparation before repainting: dilute 1:10 with water, apply with a scouring sponge or cleaning sponge, allow it to work for a few minutes, wipe away with plenty of water and allow the surface to dry thoroughly before you start painting. For cleaning only: dilute depending on the level of soiling, from 1:10 for heavy soiling to 1:100 for light soiling.

Would you like more information on how to paint without sanding? Check out our helpful guide for additional advice and step-by-step instructions.

Solutions for degreasing wood and paint

If you are looking for household solutions to degrease wood and paint, there are several options to consider. While these methods can sometimes be effective, it is important to know that they do not always guarantee the best results and may carry certain risks. Here are some suggestions:

• Warm water with washing-up liquid: Mix warm water with mild washing-up liquid and use a cloth or sponge to clean the surface. Rinse thoroughly with clean water.
• Warm water with baking soda: Dissolve a tablespoon of baking soda in warm water and apply to the surface with a cloth. Allow it to work for a while, then wipe off with a clean, damp cloth.
• Hot water with salt: Mix hot water with a tablespoon of kitchen salt and use this mixture to gently clean the surface. Then rinse thoroughly with clean water.

While these solutions can work in some cases, it is advisable to test on a small, inconspicuous area first before treating the entire surface. If in doubt, or for the best result, we recommend going straight for HG liquid sander for painting without sanding, which is specially developed for this purpose.

Causes of contaminated surfaces when painting

It is important to properly degrease surfaces before painting. A contaminated surface can lead to problems with paint adhesion and durability. Here are some common causes of a contaminated surface:

• Natural oils and resins in wood
• Build-up of dirt, dust and grease
• Residue from old paint or coatings
• Atmospheric pollution or nicotine deposits

To prevent these problems in future, you can take the following steps: Thoroughly clean the surface with a suitable cleaner before you start painting. Use a high-quality degreaser suitable for paintwork, such as HG liquid sander for painting without sanding. Allow the surface to dry thoroughly before you start painting. Ensure a dry and dust-free environment during painting. Apply a primer if necessary for extra protection and paint adhesion.